How weather proof is the TeeMatic?
How do I move the TeeMatic?
How durable is the TeeMatic?
What kind of power do you need to run the TeeMatic?
How much does the TeeMatic weigh?
What type of clubs can I use on the TeeMatic?
What ages can use TeeMatic?
Where can I use the TeeMatic?
What is the reason for being able to tee the ball
on the right or the left hand side?
What is the reason for the metal track in the back
base?
Why high and low tee?
What is the advantage of the iron hitting surface?
What is the warranty of the TeeMatic?
The TeeMatic is weather-resistant. The TeeMatic
is made from high quality polyethylene plastic and is UV protected.
The wiring is protected from moisture and the switch connectors
are protected with high quality heat shrink. It is recommended
that the TeeMatic not be left out during inclement weather nor
indefinitely. The pneumatic switch could freeze and burst if left
out in freezing temperatures. It is recommended that the TeeMatic
be used in temperatures above 35°.
(back
to top)
To move the TeeMatic, disconnect the front
base from the back base. Insert the casters into the metal track
and lift the opposite side of the back base until the casters
make contact with the ground. Simply wheel the TeeMatic to where
you want to use it.
(back
to top)
The high quality UV protected plastic and quality
parts should give years of enjoyment. All metal parts are either
stainless steel or galvanized to help prevent corrosion.
(back
to top)
The TeeMatic will operate off either an AC
110 outlet or off of a 12 V DC power supply. A 12 V DC rechargeable
battery can be ordered along with a charger for use of the TeeMatic
in remote areas where AC power may not be available or when the
user wishes to use the TeeMatic outdoors. The battery will operate
the TeeMatic through 1000+ operations.
(back
to top)
The front base weighs approximately 40 lbs.
The back base weighs approximately 50 lbs.
(back
to top)
All woods and irons can be used on the TeeMatic.
Tee up the ball to use your driver or move the ball spout to the
center position and use fairway woods and irons on the brush or
fairway surface which is made by the FiberBuilt® Golfmat System.
You can order sand, rough, and alignment turf to replace the original
fairway turf.
(back
to top)
Golfers of all ages and skill levels can use
the TeeMatic to increase their enjoyment of the game of golf.
(back
to top)
The TeeMatic can be used in locations where
it is safe to swing a golf club. Different styles of nets are
available to match your needs.
(back
to top)
The left gutter and tee placement is for the
right handed golfer. Turn the machine around, change the tee to
the right hand side, put the plug in the left hand gutter and
the TeeMatic is set for left handed golfer.
(back
to top)
The metal track allows the golfer to move the
tee to the desired spot for his/her stance.
(back
to top)
The choice of a high or low tee allows the
golfer to practice with a driver, fairway wood, or iron.
(back
to top)
The patented FiberBuilt® "long fiber
grass" allows the golfer to hit down and through the ball
with a proper swing and true fairway feel, with no hand shock
or arm injury.
(back
to top)
90 days parts & labor; 1 year parts.
(back
to top)
|